ArcticChill 108

Exceptional Dispense Height of 29cm

• The ArcticChill 108 is identical to the very successful ArcticChill 88. The main change is a new upper front panel with an increased dispensing height to 29cm.
• Single dispensing button for chilled water only
• High-capacity direct chill cold water
• FloodGuard inlet solenoid flood protection
• Can be fitted with overflow kits and mains drainage
• Fits AA Cooler cowling and wall bracket
• Stylish design in anthracite livery

Performance

Delivers 30–40 litres per hour of chilled water below 12°C.

For optimum flow rate, the mains water pressure at the point of entry into the cooler should be around 3.5 bar.

Accessories for the ArcticChill 108

Installation Rail with Filter

Includes:

• Compression fitting
• 1-micron green filter
• Water block
• Copper pressure-reducing valve
• Non-return valve

FloodGuard

The closed inlet solenoid only opens to allow water into the cooler when water is dispensed. By remaining closed at all other times, it protects the cooler against leaks.

KLARAN UVC LED Shield

Protects direct chill water coolers from bacteria, viruses and other pathogens, providing point-of-dispense protection.

Available as:

• Factory-fitted option
• Self-installed option

Mains Drainage

Connects the drip tray to mains drainage.

It can also be supplied with pumped waste where mains drainage is unavailable.

3-Litre Overflow Kit

Connects the drip tray to a 3-litre alarmed overflow container.

10-Litre Overflow System

Includes an alarm to signal when the container is full.

Factory fitted.

Dimensions and Weight